Cordless Direct Part Mark Readers
Reads All Bar Codes and Direct Part Marks (DPM/UID) Automatically!The DS3678 DPM Series Bluetooth Wireless industrial DPM/UID readers from Zebra Technologies uses digital signal processing (DSP) CCD imaging technology to accurately read laser, dot peen marked, chemical etch and other types of direct part markings at distances from 1” to 12” or more. In addition the DS3678 reads all types of two-dimensional (2D) and one-dimensional (1D) printed bar codes automatically.
A Non Contact DPM/UID High Performance Reader with Variable Focus!The DS3678 DPM comes equipped with a charge-coupled device (CCD) image sensor and special direct part mark reading software, which allow it to more accurately capture and process DPM at speeds, angles and distances never before seen in a DPM/UID reader. With Zebra ’s patented variable focus technology, you are able to read DPM at ranges from 1" to over 12" automatically without refocusing. In addition, the DS3678 DPM’s omni-directional reading functionality lets operators quickly capture both DPM/UID marks and bar codes from any angle, eliminating the need to read DPM/UID straight on. The DS3678 DPM has the widest working range of any DPM Reader in its class. Its smart focus technology allows you to read DPM/UID marks and bar codes regardless of the size or density of the code from a variety of distances automatically. This means that this single device can work well for all your DPM/UID and barcode scanning needs.
Reads Very Low Contrast and Poorly Marked DPM/UID With Ease!Because the DS3678 DPM uses Digital Signal Processing (DSP) CCD technology instead of cameras to read DPM/UID marks, the DS3678 DPM can easily distinguish and read very low contrast or poorly marked DPM/UID marks with ease. In addition the DS3678 DPM can read DPM/UID marks as tiny as 4 mil to more than 12 inches or more in size. The DS3678 DPM can read pin marked DPM/UID marks easily from angles as steep as 80 degree tilt away from perpendicular.